Bevelling machine CHP-12G

Ergonomic work, flexible production

Perfect bevel for all common chamfer angles

You are here

CEVISA CEVISA CHP-12G CEVISA

The plate and tube beveling machine CHP-12G is the adjustable version of the CHP-12. Fully equipped, this machine is designed for bevelling plates and tubes at any anglebetween 20 to 45°with optimum plate/machine working position.

The trolley improves machine stability and cutter life and makes this machine easy to use for large plate chamfering / weld seams preparation.

This machine is crucial for overall higher production performance. Faster and more stable, with no dust or noise, this fast self-feed bevelling system reduces wasted time and costs more than 80% throughout the entire sheet metal welding preparation process. Furthermore, No supervisory control is needed from workers during bevelling process.

Benefits of adjustable shearing cutting bevelling machine CHP-12G

  • Constant and uniform bevel angles and depth
  • The fastest & the most stable to bevel large plates
  • Easy to handle and install
  • Security: no need for supervisory control
  • Flexible
Data sheet
0.8Mb
Bevelling machine CHP-12G
Technical details
Performances
  • Speed: 2.6 m/min
  • Maximum bevel in one run: 12 mm*
  • Maximum bevel recommended in several runs: 17 mm*
  • Maximum recommended thickness: plates and tubes up to 20 mm
  • Nominal thickness: plates and tubes from 6 mm to 30 mm
  • Plate beveling: width min. 55 mm (for smaller width, please consult)
  • Tube bevelling: Ø min. int.100 mm
  • Disc bevelling: Ø min. 350 mm

* Dimensions calculated on 400 Mpa steel, bevel length

Specifications

Motor: three-phase
Motor power: 3  CV – 2.2 kW

Voltage:

  • 220/380 V. 50 Hz.
  • 250/440 V. 60 Hz.
  • For other voltages, please consult us

Electric box with

  • Emergency stop button
  • Thermomagnetic switch trip

Net weight: 135 kg
Works height: adjustable
Reversing switch

Bevel blueprint

Plate bevelling: K, V, X and Y bevels
Pipe bevelling: vertical or horizontal position – K, V, X and Y bevels, on the inside or the outside of the tube (depending on diameters).
Bevel speed: 2.6 m/ min.

CEVISA's advantages
  • Adjustable angles from 20° to 45°: constant and uniform bevel angles and depth
  • The fastest & the most stable to bevel large plates
  • Easy to handle and install
  • Security: no need for supervisory control
Accessories
Cevisa’s beveling machine is provided with
  • 3 cutters for mild steel (1 on machine)
  • 1 set of spanners
Extras & consumables:
  • Cutters for mild steel
  • Cutters for stainless steel
  • Cutters for aluminum
  • Plastic rollers to avoid material marking
Videos