Bevelling machine CHP-7

Compact equipment & easy to handle

Portable, lightweight and fast, perfect for small thicknesses

You are here

CEVISA CEVISA CHP-7 CEVISA

The beveller CHP-7 bevels large plates, small sheets, pipes & tubes with small thicknesses. Totally self-feed, the beveling machine CHP-7 will meet all your bevel requirements, especially for thin materials, from 4 mm to 8 mm thick and also for aluminum. High speed beveling guaranteed: 1.6 m/min.

Portable, easy to handle and fast, the CHP-7 is the option for all industries that are looking for better results & performance in time saving andfaster production.

Benefits of standard shearing cutting bevelling machine CHP-7

  • Easy-to-use whatever work machine position
  • Functional for workshop and construction on-site, 1.7m/min bevel speed
  • Flexible and efficient bevel system
  • Recommended for bevelling aluminum
Data sheet
0.6Mb
Bevelling machine CHP-7
Technical details
Performances
  • Maximum bevel in one run: 6 mm*
  • Maximum bevel recommended in several runs: 10mm*
  • Maximum recommended thickness: plates and tubes up to 8 mm.
  • Nominal thickness : plates and tubes from 3 mm to 16 mm.
  • Double bevel with 2 machines working in parallel: CHP 12 + CHP12 INV.
  • Plate bevelling: width min. 55 mm (for smaller width, please consult).
  • Tube bevelling: Ø min. int.100 mm.
  • Disc bevelling: Ø min. 350 mm.

* Dimensions calculated on 400 Mpa steel, bevel length.

Specifications

Motor: three-phase
Motor power: 0.75 CV – 0.55 kW

Voltage:

  • 220/380 V. 50 Hz
  • 250/440 V. 60 Hz
  • For other voltages, please consult us.

Electric box with:

  • Thermomagnetic switch trip
  • Emergency stop button

Net weight: 45 Kg
Works height: adjustable
Reversing switch / Switcher

Bevel blueprint

Plate bevelling: K, V, X and Y bevels
Pipe bevelling: vertical or horizontal position – K, V, X and Y bevels, on the inside or the outside of the tube(depending on diameters).
Bevel speed: 1.6 m/ min.

CEVISA's advantages
  • Easy-to-use whatever work machine position
  • Functional for workshop and construction on-site, 1.7m/min bevel speed
  • Flexible and efficient bevel system
  • Recommended for bevelling aluminum
Accessories
Cevisa’s beveling machine is provided with:
  • 3 cutters for mild steel (1 on machine)aplicar en todo
  • 1 angle variation device -  30°
  • 1 device to bevel tubes
  • 1 set of spanners
Extras & consumables:

Cutters for mild steel
Cutters for stainless steel
Cutters for aluminum
angle variation devices: 22.5 - 25º - 30º - 35º - 37.5º - 45º
(For others angle, please enquire)
Plastic rollers to avoid material marking
Spare part for small width plates: min. plates width 20 – 25 – 32 and 40 mm

Videos