Plate and tube beveler CHP-12

The most versatile beveling machine

Pionneer in the design and manufacturing of bevelling machines

You are here

CEVISA CEVISA CHP-12 CEVISA

Unique flexible beveling machine able to bevel plates and tubes, including largediameters. Its flexibility, versatility and high speed bevel, make the CHP-12 the first model to be sold all over the world with years of international success. The early design dates back to 1972, built into our corporate Cevisa DNA, exported to thousands of companies across the 5 continents, being a reference for steel industries. In short, it was created to optimize welding preparation processes.

The beveler CHP-12 remains the most efficient and reliable beveling machine on the market. It replaces manual tiresome processes for workers, avoiding high production costs for the company.
Proven high cost-effectiveness: 6 meter plates beveled in less than 3 minutes

Benefits of plate and tube beveler CHP-12

  • High average cutters lifespan : about 1.000 m
  • High profitability: Extremely low cost/beveled meter/ minute
  • Zero maintenance.
  • Self-feed.
  • Easy-to-handle and easy to use.
  • Flexible.
Data sheet
0.8Mb
Plate and tube beveler CHP-12
Technical details
Performances
  • Speed: 2.6 m/min
  • Maximum bevel in one run: 12 mm*
  • Maximum bevel recommended in several runs: 17 mm*
  • Maximum recommended thickness: plates and tubes up to 20 mm
  • Nominal thickness: plates and tubes from 6 mm to 40 mm
  • Double bevel with 2 machines working in parallel: CHP 12 + CHP12 INV
  • Plate beveling: width min. 55 mm (for smaller width, please consult)
  • Tube bevelling: Ø min. int.100 mm
  • Disc bevelling : Ø min. 350 mm

* Dimensions calculated on 400 Mpa steel, bevel length

Specifications

Motor: three-phase
Motor power: 3  CV – 2.2 kW

Voltage

  • 220/380 V. 50 Hz
  • 250/440 V. 60 Hz
  • For other voltages, please consult us

Electric box with:

  • Emergency stop button.
  • Thermomagnetic switch trip.

Net weight: 65 Kg
Works height: adjustable
Reversing switch

Bevel blueprint

Plate bevelling: K, V, X and Y bevels

Pipe bevelling: vertical or horizontal position – K, V, X and Y bevels, on the inside or the outside of the tube (depending on diameters).

Bevel speed: 2.6 m/ min.

CEVISA's advantages
  • High average cutters lifespan: about 1.000 m
  • High profitability: Extremely low cost/beveled meter/ minute
  • Zero maintenance
  • Self-feed
  • Easy-to-handle and easy to use
  • Flexible

 

Accessories
Cevisa’s beveling machine is provided with:
  • 3 cutters for mild steel (1 on machine)
  • 1 angle variation device - 30°
  • 1 device to bevel tubes
  • 1 set of spanners

 

Extras & consumables:

Cutters for mild steel
Cutters for stainless steel
Cutters for aluminum
angle variation devices: 22.5 - 25º - 30º - 35º - 37.5º - 45º
(For others angle, please enquire)
Plastic rollers to avoid material marking
Spare part for small width plates: min. plates width 20 – 25 – 32 and 40 mm

Videos