Bevelling machine CHP-21G INV

Features increased capacity production

Stops turning plates. Eliminate risks and save production time

You are here

CEVISA CEVISA CHP-21G INV CEVISA

This beveler CHP-21G INV is designed to make lower bevelsfor big and heavy plates without turning them over. This beveling machine offers the same featuresand benefits asits counterpart the CHP-21G beveler.

The CHP-21G INV is compatible with the CHP-21G working in parallel achieves exceptional productivity rate with just one operator.

Benefits of adjustable shearing cutting bevelling machine CHP-21G INV

  • All-purpose tool: one cutter tool for all material.
  • High performance: bevel speed + bevel depth / min.
  • All-in-1: wide range of bevel depth, adjustable angeles, built-in trolley, self-feed.
  • Robustness: reliable, efficient, recommended for 24h services.
  • Secure: self-monitoring bevel.
Data sheet
1.1Mb
Bevelling machine CCHP-21G INV
Technical details
Performances
  • Maximum bevel in one run: 20 mm*
  • Maximum bevel recommended in several runs: 28 mm*
  • Maximum recommended thickness: plates and tubes up to 40 mm
  • Nominal thickness: plates and tubes from 9 mm to 50 mm
  • Angle variation: from 20° to 45°
  • Plate beveling: width min. 70 mm
  • Tube bevelling: Ø min. int.100 mm
  • Disc bevelling: Ø min. 350 mm

* Dimensions calculated on 400 Mpa steel, bevel length

Specifications

Motor: three-phase
Motor power: 4 CV – 3 kW

Voltage:

  • 220/380 V. 50 Hz.
  • 250/440 V. 60 Hz.
  • For other voltages, please consult us

Electric box with:

  • Thermomagnetic switch trip
  • Emergency stop button

Switcher
Net weight: 450 kg
Works height: adjustable from 850 mm to 880 mm
Built-in trolley

Bevel blueprint

Plate bevelling: K, V, X and Y bevels
Pipe bevelling: vertical or horizontal position – K, V, X and Y bevels, on the inside or the outside of the tube (depending on diameters).
Bevel speed: 1.7 m/ min.

CEVISA's advantages
  • All-in-1: wide range of bevel depth, adjustable angles, built-in trolley, self-feed
  • High performance: 1,7m / min bevel speed + bevel depth
  • Robust: reliable, efficient, recommended for 24h services
  • All-purpose tool: one cutter tool for all material
Accessories
Cevisa’s beveling machine is provided with:
  • 3 cutters for steel (1 on machine)
  • 1 set of spanners for the machine adjustment
Extras & consumables:
  • Universal cutter
  • Plastic rollers to avoid material marking
Videos