Bevelling machine CHP-12G REV

Fulfilling all metalworkers expectations

All-in-one beveler, completely adjustable & autonomous for long period of production

You are here

CEVISA CEVISA CHP-12G REV CEVISA

2 in 1 high performance bevelling machine, fast reverse beveler perfect for controlled activity cycles. The beveling machine CHP-12G REV provides flexibility and security to achieve the shortest lead time and optimum cost for a machine made to bevel fast, with no need for turning plates

All-in-one technologies: 2.6 m/min speed, self-feed, bevel angle adjustment, reverted positions for upside-down bevels avoiding turning plates over, easy set up and use, no supervisory control whilst beveling work.

Benefits of reversible shearing cutting bevelling machine CHP-12G REV:

  • Ergonomics: designed to fulfill any bevel needs at any angle.
  • Flexible: optimum idealfor wide platesdimension beveling, suited also suited for small sheets and tubes.
  • Robustness for high productivity.
  • All in 1 automated beveler.
  • Easy to set-up and operate.
Data sheet
0.8Mb
Bevelling machine CHP-12G REV
Technical details
Performances
  • Speed: 2.6 m/min
  • Maximum bevel in one run: 12 mm*
  • Maximum bevel recommended in several runs: 17 mm*
  • Maximum recommended thickness: plates and tubes up to 20 mm
  • Nominal thickness: plates and tubes from 6 mm to 30 mm
  • Plate beveling: width min. 55 mm (for smaller width, please consult)
  • Tube bevelling: Ø min. int.100 mm
  • Disc bevelling: Ø min. 350 mm

* Dimensions calculated on 400 Mpa steel, bevel length

Specifications

Motor: three-phase
Motor power: 3  CV – 2.2 kW

Voltage:

  • 220/380 V. 50 Hz
  • 250/440 V. 60 Hz
  • For other voltages, please consult us

Electric box with:

  • Thermomagnetic switch trip.
  • Emergency stop button.

Net weight: 135 kg
Works height: adjustable
Reversing switch

Bevel blueprint

Plate bevelling: K, V, X and Y bevels
Pipe bevelling: vertical or horizontal position – K, V, X and Y bevels, on the inside or the outside of the tube (depending on diameters).
Bevel speed: 2.6 m/ min

CEVISA's advantages
  • 2 in 1 automated beveller: reverted positions for upside-down bevels avoiding turning plates over
  • Robust for high productivity – 2.6 m speed bevel
  • Ergonomics : designed to fulfill any bevel needs at any angle
  • Easy to set-up and operate
Accessories
Cevisa’s beveling machine is provided with:
  • 3 cutters for mild steel (1 on machine)
  • 1 set of spanners
Extras & consumables:
  • Cutters for mild steel
  • Cutters for stainless steel
  • Cutters for aluminum
  • Plastic rollers to avoid material marking
Videos