Bevelling machine CHP-12 INV

Highest profitability & productivity

More flexible and more productive than ever! (Suited for upside-down bevels)

You are here

CEVISA CEVISA CHP-12 INV CEVISA

The CHP-12 INV can bevel in an upside-down position effortlessly in a complete self-feed mode. As its emblematic model the CHP-12, the beveler CHP-12 INV is the perfect solution to bevel largediameter tubes as well as tankheads, thanks to its breathing valves.

Its bevelling speed makes this machine the most high performance and flexible beveling system of all the CHP-12 range for large plates and diameter tube bevelling, simplifying production processes as much as possible and reducing production time.

Benefits of standard shearing cutting bevelling machine CHP-12 INV

  • Flexible: breathing valve to change position easily.
  • High profitability: high speed self-feed bevel -2,6 m/min.
  • Constant and uniform bevel depth + high bevel capacity up to 17 mm bevel.
  • Dry cut: no need to prepare plates and tubes to bevel.
Data sheet
0.8Mb
Bevelling machine CHP-12 INV
Technical details
Performances
  • Speed: 2.6 m/min
  • Maximum bevel in one run: 12 mm*
  • Maximum bevel recommended in several runs: 17 mm*
  • Maximum recommended thickness: plates and tubes up to 20 mm
  • Nominal thickness: plates and tubes from 6 mm to 40 mm
  • Double bevel with 2 machines working in parallel: CHP-12 + CHP-12 INV
  • Plate beveling: width min. 55 mm (for smaller width, please consult)
  • Tube bevelling: Ø min. int.100 mm
  • Disc bevelling: Ø min. 350 mm

* Dimensions calculated on 400 Mpa steel, bevel length

Specifications

Motor: three-phase
Motor power: 3  CV – 2.2 kW

Voltage:

  • 220/380 V. 50 Hz.
  • 250/440 V. 60 Hz.
  • For other voltages, please consult us

Electric box with:

  • Thermomagnetic switch trip
  • Emergency stop button

Net weight: 65 Kg
Works height: adjustable
Reversing switch

Bevel blueprint

Plate bevelling: K, V, X and Y bevels
Pipe bevelling: vertical or horizontal position – K, V, X and Y bevels, on the inside or the outside of the tube (depending on diameters).
Bevel speed: 2.6 m/ min

CEVISA's advantages
  • Flexible: breathing valve to change position easily
  • High profitability: high speed self-feed bevel -2,6 m/min
  • Constant and uniform bevel depth + high bevel capacity up to 17 mm bevel
  • Dry cut: no need to prepare plates and tubes to bevel
Accessories
Cevisa’s beveling machine is provided with:
  • 3 cutters for mild steel (1 on machine)
  • 1 angle variation device - 30°
  • 1 device to bevel tubes
  • 1 set of spanners
Extras & consumables:
  • Cutters for mild steel
  • Cutters for stainless steel
  • Cutters for aluminum
  • Angle variation devices: 22.5 - 25º - 30º - 35º - 37.5º - 45º
    (For others angle, please enquire)
  • Plastic rollers to avoid material marking
  • Spare part for small width plates: min. plates width 20 – 25 – 32 and 40 mm
Videos